This amazing Lego mecha is, according to the authoritative Brothers Brick, the first walking Lego mecha that “also boosts aesthetics”. We take that to mean that it actually walks by picking up its feet rather than shuffling along like a burned-out meth-addict.

Either way, the IR-remote controlled bot, named Element Commune, is a fantastic build by Flickr user Legohaulic. Here it is in herky-jerky action:

V2.0 will actually be steerable (this one just stops and starts, “walking” in a straight line), and we particularly like the tiny t-rex arms at the front. We wouldn’t want to climb inside the full-sized versions, though. As Brothers Brothers commenter Kunert says, “That thing would go down like ED-209 in a stairwell.”

Element Commune: LP-11 [FLickr]

Legohaulic’s walking biped revolutionizes mecha building [Brothers Brick]

See Also:

• Real Life Gundam Would Cost $725 Million
• Artist Creates Steampunk-style Wooden Robot, Time Machine, and a …
• 10 Sci-Fi Techs We Could Build If They Weren't So Damn Expensive …
• Stunning Papercraft Transfomer Model was Inspired by Cookies …

Go to Source

If you have watched too many episodes of Criminal Minds, you probably already have a panic room in your home, ready for when golf-club and baseball-bat wielding psychopaths invade your house. But what of the other place where you spend so much of your time? What if you car plunges down a steep ravine into the rushing waters below, or you flip your ride on its roof and hang, dangling helplessly from the seatbelt while the gasoline drips ever closer to the broken mirror focusing burning sunlight onto the hot asphalt? What then?

You will need the ExiTool, billed as a “seat belt cutter, window breaker, LED flashlight tool”. The ExiTool clips onto your seatbelt and there it stays, holding its steel blade, tungsten window-smashing nubbin and button-cell powered flashlight just where you’ll need it in case of hugely unlikely emergency. Not convinced? This awful video certainly won’t help, but it will make you laugh. It appears almost as a parody, as if a real informercial had been “sweded“:

The ExiTool will be available “soon” for “just” $27.

ExiTool [CRKT]

Go to Source

Pentax has gone large with the new 645D medium-format DSLR. The 40MP monster has a 33×44mm sensor to fit all those pixels comfortably, and round the back has the DSLR standard-sized screen, a three-inch, 921,000 dot LCD. For a camera of this type the 645D is cheap, at ¥850,000, or $9,400.

Pentax has traditionally offered good cameras at low prices, and the original Pentax 645 film cameras were good entry level bodies for medium-format shooters (although second-hand TLRs were the cheapest way to go). The new 645D looks a lot like the old film body, a cube-shaped box with the protruding handle. In fact, all your old 645 lenses should work.

This camera is about studio work, and you won’t find fancy face-recognition gimmicks. There are still some unusual features, though. Built-in HDR, the choice of SD cards (dual slots) over Compact Flash and an in-camera HDR mode which will combine three images into one.

A size comparison of the 645D sensor next to a full-frame 35mm sensor

The exposure modes are great, and I want them in my camera. Alongside the usual shutter and aperture-priority modes, you get sensitivity-priority mode, which lets you set the ISO and the camera picks shutter speed and aperture. Also included is a shutter/aperture-priority mode, which lets you pick the shutter and aperture settings and tweaks the ISO to fit. Pentax is finally treating ISO as the third exposure variable, something impossible with film but obvious in digital. A gold star for Pentax.

Otherwise, things are conservative but smart. Both the top and rear screens have a tempered glass cover, the viewfinder is big enough to use (and covers 89% o the image), and the body has dust reduction. Sure, $10,000 will buy you an entire DSLR system, complete with multiple bodies, lenses and strobes. Compared to the competition, like Mamiya’s new $20,000 studio camera, it starts to look cheap. Available in Japan in May.

Pentax unveils 40MP 645D medium format DSLR [DP Review]

Go to Source

Great news for bikers: the nerds at Google have added bicycling directions to Google Maps. It appears right alongside the other options, walking, car or public transit. It doesn’t work everywhere yet – I tried to find a way from my apartment to the local bike-polo court and Google Maps just told me it couldn’t calculate a route.

In San Francisco, though, everything is fine. I plugged in Wired HQ and the nearby Moscone center and got a straight three-block route. Too easy? Fine, what about Wired to Pier 39, tourist central (and home of a surprisingly good crab restaurant)? This, too, shows the same route for bikes and cars, but the alternative routes presented below are different. I guess that you get the most efficient route first, which is usually the same as you’d take in a car, with slightly more pleasant alternatives.

The service is, of course, in beta, and Google is soliciting feedback on the suitability of roads for biking. You can of course still do it the old-fashioned (and somewhat quicker) way: use the walking directions, which ignore road-rules and one-way streets.

Google Maps [Google]

Go to Source

Warpia’s new Easy Dock could do with a new name and a prettier box, but the promise of the product is an enticing one: rid yourself of (almost) all cable-clutter. The wireless-USB kit consists of a USB stick that plugs into your notebook and a base station that plugs into everything else: your monitor, speakers, keyboard and mouse. Apart from hooking your laptop up to the mains once in a while, you never need to snake cables across your clean desk again.

The Easy Dock will be $150 when it ships in a few weeks (we will be testing one out). I’m pretty excited as I have been looking for something like this for a while. Once the drivers are installed (for OS X and Windows), the OS should just see the peripherals as USB devices. But how well does the display work? The specs say that it supports monitors of up to 1400×1050 and will display HD video up to 720p, at a color depth of 32-bits.

We wonder if hard drives can be hooked up, (we’ll test that one out) and just how the display copes with movies and fast-moving games. If it all works as promised, the dock could be great for keeping your desk clear, or it could let you stream movies direct from your laptop to the big screen and speakers. One day, we hope, this tech will just come standard inside every USB device.

Easy Dock [Warpia. thanks, Natalia!]

See Also:

• Imation Ships First Wireless USB Hard Drive
• WiGig Tempts With High-Speed Wireless Data Transfer
• Iogear Announces Wireless Kit for Monitors and Projectors
• WUSB
• Cheap, Home Made Wi-Fi Tether
• Review: Kensington Docking Station Makes Mobile Computing Almost …

Go to Source

Product: Remix Remote Earbuds

Manufacturer: V-MODA

Wired Rating: 6

V-Moda’s new Remix Remote earbuds are a fender bender at the intersection of form and function. While the design is loud and eye catching the audio impact is fairly negligible.

The black and silver ‘buds fit comfortably in ear and deliver mediocre sound: mids and highs are decent but lows are crappy and there’s little separation. They’re also supposed to invoke the sense of listening to live music. That isn’t quite true; never once did the Remixes fool us into thinking we were in a concert hall. What is true? How well they deflect outside noise. During our testing we completely missed someone shouting at us on the street as we were rocking out to ’90s pop tunes. (Janet Jackson what?!)

The earbuds also double as a hands-free set. There’s a lightweight, built-in remote that lets you easily switch between music and calls with the touch of a button. However, the included plastic supports (for securing the buds to your ears while running) cause the remote to rise to just a few inches below the chin. This proved to be a bit awkward; the remote bangs against your chest if you’re out for a jog.

Call clarity was good on our end, but callers consistently had a hard time hearing what we were saying.

At best the Remixes are a hundred-dollar headphone upgrade — certainly better than the standard issue crud buds Apple doles out with its products. At worst, they’re fancy looking, yet curiously effective, earplugs.

WIRED Want to tune out the rest of the world? Shove these in your ears. Easy to toggle between headphone and hands-free mode.

TIRED We’ve heard better sound from similar priced earbuds. Woeful mic fuzzes the punch line of your awesome jokes.

Go to Source

We’d be naive to think manufacturers were twiddling their thumbs while Apple pimps out its iPad. Sure enough, there could be as many as 50 tablet devices from competing manufacturers worldwide this year, according to mobile microprocessor company ARM.

In anticipation of the upcoming tablet invasion, ARM has rented out more space at the Computex electronics trade show in Taipei to accommodate the new devices, according to ComputerWorld.

“The first tablet devices will launch in the second quarter by [mobile network] carriers,” said Roy Chen, ARM’s worldwide mobile computing ODM manager, during a press meeting in Taipei. “You’ll see a lot more in the third quarter.”

ARM licenses its microprocessor technologies to many manufacturers for their mobile devices, so we can trust that Chen has some inside knowledge about upcoming tablets. (The iPhone’s processor is ARM-based, for example.)

Chen noted the majority of the tablets will launch in China, but that “companies everywhere” are delivering tablets as well. He didn’t name specific companies. However, in the United States we’re aware of upcoming tablets from HP and Dell. And before the iPad even lands, startup Fusion Garage plans to release its JooJoo tablet.

Wired.com last year predicted that 2010 would be the year of the tablet after hearing from industry sources that several major manufacturers, including Dell and HTC, were planning to launch tablets.

See Also:

• Dell Names Secret ‘Slate’ After Non-Existent Apple Product …
• Would You Buy an iPad? Wired Readers Weigh In
• HP’s Windows 7 Slate Strikes at the iPad
• Why 2010 Will Be the Year of the Tablet
• The Wired Tablet App: A Video Demonstration

Photo: Jon Snyder/Wired.com

Go to Source

As you probably know, your hard drive is the device which is most likely to fail. While a hard drive can fail at any time without warning, the S.M.A.R.T. sensors build into modern hard drives are a good indicator of your overall drive health. A very simple tool which allows you to view this data is Nirsoft’s DiskSmartView.

DiskSmartView is a small utility that retrieves the S.M.A.R.T information (S.M.A.R.T = Self-Monitoring, Analysis, and Reporting Technology) from IDE/SATA disks. This information includes the disk model/firmware/serial number, cylinders/heads, power-on hours (POH), internal temperature, disk errors rate, and more. You can use the S.M.A.R.T information retrieved by DiskSmartView to find out whether there is any significant problem in your disk drive.

When you launch the program, you are presented with a large list of raw number which are indicators of your drive’s health. For a breakdown of what these magical numbers mean, you can check out Wikipedia’s information on S.M.A.R.T. Additionally, there is a column called “Status” which will give you a quick indication of if the value is a warning sign.

DiskSmartView does not require any installation, so this is nice tool to include on your utility flash drive.

Post from: PCMech.

Easily View The S.M.A.R.T. Information Of Your Hard Drives

Go to Source

Quirky’s new crowd-sourced widget, the Cloak, is a rather clever and good-looking iPad case. The rubber and plastic construction goes with the already established book-cover metaphor, and adds a few twists.

We predict a huge market for iPad cases. That may seem obvious, given the amount of protective sheathes out there for iPods and iPhones, but the iPad seem to need a little more coddling than these smaller machines. I’m a strictly commando kind of guy: I slip my gadgets bareback into my pocket, but even I will be buying or making an iPad case. First, it’s bigger, and you can’t reserve a key-free jeans pocket for it. Second, this device begs to be propped up, either for watching movies, typing or just listening to podcasts in the kitchen.

The Cloak’s front cover flips around to the back to prop the iPad up in landscape mode, and when upright, the inside of the same front-cover has a u-shaped plastic kick stand that flips out. The main hinge actually has click-stops, controlled by a button on the spine, which lets you set an angle without the iPad slipping and falling flat.

That’s quite a lot to pack into one case, and the price isn’t bad, either, at $36. As always, you commit to order, the productions lines spin-up when the minimum order is reached and you are charged when the product ships. Hopefully you’ll have yours in time for the April 3rd iPad release.

Cloak [Quirky. Thanks, Tiffany!]

See Also:

• First iPad Stand Steps into View
• Kickster Adds Stand, Handle and Case to iPod Nano
• Powercurl Cord-Winder Makes Magsafe Heatsafe

Go to Source

We’ve been told ever since we started using web browsers that it’s a good idea to clear out your cache and cookies periodically. This used to be a pain in the neck to get done, but with modern flavors of web browsers you can clear this information out easily. In IE8 and Firefox you can use the keystroke CTRL+SHIFT+DEL, then in IE8 choose to clear Temporary Internet Files and Cookies, and in Firefox choose Cache and Cookies.

But then there’s the SuperCookie. They are generated by that browser plugin we all love to hate, Adobe Flash.

The browser on its own cannot delete SuperCookies due to Flash not being a native component of the browser. No matter which browser you use on your PC, Flash will always store its own cookies.

And just where are SuperCookies stored? They’re buried deep.

On a Windows PC, launch an explorer window or Internet Explorer session. In the address bar, type %appdata%. When that window pops up, double-click Macromedia, then Flash Player, then macromedia.com, then support, then flashplayer, then sys and FINALLY.. we get to where the SuperCookies are stored.

Like I said, it’s buried deep. I wasn’t kidding.

You’ll notice a bunch of folders here, each with a setings.sol file in them. That’s the SuperCookie.

Where are SuperCookies stored on a Mac or Linux/UNIX?

I have no idea, but my best guess is that they’re in your user folder somewhere. If any of you Mac or Linux/UNIX users can find the location, please feel free to post a comment explaining where they are, because they are there if you use Flash.

How do you delete SuperCookies?

Adjusting Flash storage settings

This is, strangely, done via the Adobe web site.  Click on each one of these links to adjust the settings:

• Global Privacy Settings
• Global Storage Settings
• Global Security Settings
• Website Privacy Settings
• Website Storage Settings

Manual way

Close all your web browsers, then delete everything in the sys folder. Don’t delete the sys folder itself because that can cause problems. Just delete the content inside sys.

Automatic way

If using Firefox, you’re in luck because you can use the BetterPrivacy add-on. What this will do is delete all SuperCookies every time the browser is closed.

Do you have to delete SuperCookies?

Not usually. However if you use web sites that contain a good amount of Flash content and something “goes weird” periodically, chances are clearing out the SuperCookies will usually fix the problem.

Post from: PCMech.

How To Deal With SuperCookies

Go to Source